The V+F Lens Control is available as a single channel wireless/cable control (p/n 4050) or a cable only version (p/n 4051). Both are used with DM-1 or DM-2 digital motors. The cable only versionis intended to control the iris function of cinema style lenses mounted on video cameras.

In this mode, the iris is controlled through:
the cameras' remote set-up box (Sony RMB-150 or equivalent)
through the cable connected Remote iris Box (p/n 4020)
through the on-board control knob.


The wireless version adds the possibility of control through any of three wireless hand units:
Focus-Iris Hand Unit
FI+Z Hand Unit w/ MW Transmitter
Radio Micro Force unit


Wireless channels are indicated on the digital display. A three position switch adjusts the motortorque level, and a second switch determines the direction of motor rotation. The small size of the control makes it especially suitable for hand held use.

The FI+Z Hand Unit (p/n 4000 with Microwave Transmitter p/n 4910), the Focus-Iris Hand Unit(p/n 4024) or the Radio Micro Force (p/n 4015 or 4016) can all be used for wireless operation with version p/n 4050. The mode switch selects whether the unit responds to Focus, Iris, or Zoom commands. Camera Run/VTR signals are available for controlling all film and video cameras.

The unit operates over a voltage range of 11 - 30 VDC. For video cameras, all power and control signals are provided through the 12-pin Hirose on the camera. Film cameras having accessory receptacles capable of 1.5A @ 24V (Arri 435, Panavision) can also be used to provide both power and camera run functions. Otherwise separate receptacles are provided for external power and Camera Run/VTR

Specifications
Size: 107mm x 66mm x 45mm (4.2" x 2.6" x 1.75")
Weight: 350g
Power Requirements: 11 - 30 VDC 0.2A quiescent at 12VDC